Wire Terminals

Single Board Computers
Microprocessor Training Systems
Custom Engineering & Manufacturing

PCM-39E00

PCD-3950

Pricing

PCM-39E00

50-pin & 40-pin Cable Wiring Terminal

The PCM-39E00 consists of universal screw terminals designed for field signal wiring in industrial applications. The PCM-39E00 was designed specifically to be connected to the 50 pin and 40 pin I/O rack compatible headers of the EMAC PCD-E12, PCM-37E12, and the iPac Line of SBCs. When used with the PCM-37E12 or the iPac, the PCM-39E00 can be mounted above the using the same mounting holes or off to the side. When used with these boards two PCM-39E00 can be used stacked or off to the side in order to accomodate all the I/O these boards have to offer.

Features

Screw-clamp terminal blocks allow easy and reliable connections
Small PC/104 form factor
Dimensions: 3.55"(L) x 3.775"(W) (90mm x 96mm)
Compatible With: PCM-37E12, PCD-E12 I/O Module, and iPac Line of SBCs

PCD-3950

50-pin Flat Cable Wiring Terminal

The PCD-3950 consists of universal screw terminals designed for field signal wiring in industrial applications. They can be connected to the 50 pin I/O rack compatible header of EMAC products such as the PCD-E12, MicroPac Line, EPAC Line, 32 Line Parallel I/O Board, or the Universal Trainer.

Features

Low cost universal DIN-rail mounting screw terminal module for 50-pin flat cable connector.
Screw-clamp terminal blocks allow easy and reliable connections
Case dimensions: 77.5 mm (W) x 146.3 mm (L) x 51 mm (H) (3.1" x 5.8" x 2.0")
Compatible With: PCD-E12 I/O Module, MicroPac Line, EPAC Line, 32 Line Parallel I/O Board, or Universal Trainer

PCD-3920

20-pin Flat Cable Wiring Terminal

The PCD-3920 consists of universal screw terminals designed for field signal wiring in industrial applications. They can be connected to the 20 pin analog in or 20 pin analog out compatible header of EMAC products such as the PCD-E12, MicroPac Line, EPAC Line, or the Universal Trainer.

Features

Low cost universal DIN-rail mounting screw terminal module for 20-pin flat cable connector.
Screw-clamp terminal blocks allow easy and reliable connections
Case dimensions: 77.5 mm (W) x 67.5 mm (L) x 51 mm (H) (3.1" x 2.7" x 2.0")
Compatible With: PCD-E12 I/O Module, MicroPac Line, EPAC Line, or Universal Trainer

PRICING (Single Unit. Includes: Integration, Setup, and Testing)

PCD-39E00-000 ... PCM-37E12 Screw Terminal Board	50.00
PCD-3950 ........ 50-pin Flat Cable Wire Terminal	60.00
PCD-3920 ........ 20-pin Flat Cable Wire Terminal	27.00

Available Options
Signal Conditioning Cards
Custom and Semi-custom Engineering Services

Product pricing, features, and specifications are subject to change without notice.