✆ Get in touch today: (618) 529-4525|info@emacinc.com

SoM-9X25M – Embedded ARM System on Module

The SoM-9×25 is an Embedded ARM System on Module (SoM) based on the Atmel AT91SAM9x25 processor. Designed and manufactured in the USA, this wide temperature, fanless ARM9 400 MHz SoM has an Ethernet PHY included along with 6 serial ports with auto RS-485. It utilizes up to 4GB of eMMC Flash, up to 16MB of serial data flash, and up to 128MB of DDR2 RAM. A SoM is a small embedded module that contains the core of a microprocessor system. Atmel AT91SAM9x25 400Mhz Processor
Up to 128 MB of DDR2 RAM
Up to 4 GB eMMC Flash
Up to 16 MB of Serial Data Flash
Wide Temperature -40C to +85C

Product Variations

Name SoM-9×25-120
Price Call
ATTRIBUTES
CPU Atmel ARM9 AT91SAM9x25 Processor
Number of Cores 1C
Speed 400 MHz
Memory 128 MB RAM onboard
Primary 4 GB eMMC
Secondary Flash 8 MB Serial Flash
Serial 6x COM
Other Serial 2x SPI, 2x CAN, 2x I²C, I2S
USB3.0 N/A
USB2.0 1x USB 2.0, 1x USB OTG
Ethernet PHY 10/100/BaseT Ethernet with on-board PHY
Expansion ARM local bus
GPIO 32x GPIO
Audio i2S
Video N/A
Operating Temperature -40 to 85 °C

Additional information

FORM FACTOR

144-PIN

PROCESSOR TYPE

Embedded Atmel ARM9 AT91SAM9X25

PROCESSOR CLOCK SPEED

400 MHz

PROCESSOR CORES

Single

RAM

128MB DDR2 RAM onboard

PRIMARY FLASH

4GB eMMC Flash

SECONDARY FLASH

8MB Serial Data Flash

MEMORY MISC.

Up to 16MB of Serial Data Flash

DISK INTERFACE

SD/MMC Flash Card Interface

BIOS / BOOTLOADER

Uboot

AUDIO

1x I2S Audio port

VIDEO OUT

None

ETHERNET

1x 10/100 BASE-T Ethernet: On-board PHY

WIRELESS NETWORKING

No

SERIAL PORTS

6x Serial Ports (RS485 & some with handshaking)

USB

1x USB 2.0 High Speed Host Port, 1x USB 2.0 Full Speed, 1x USB 2.0 OTG

CAN

2x CAN 2.0B Ports

I2C

1x I2C Port

SPI

2x SPI Ports

GPIO

32x GPIO (3.3V) Lines

SDIO

1x SDIO SD Port

TIMERS/ COUNTERS/ PWM

3x 32-bit timers/counters with capture, compare, PWM

TOUCH

None

A D CHANNELS

4

A/D RESOLUTION

10-bit

BUS EXPANSION

Local ARM Bus

OPERATING SYSTEMS

EMAC OE Linux

SIZE

2.66" × 1.5" (67mm × 38mm)

VOLTAGE

3.3 V

POWER MISC.

APM Sleep Mode

TYPICAL CURRENT

170 mA

MAX BOOT CURRENT

255 mA

CONSTANT BUSY LOOP CURRENT

245 mA

IDLE CURRENT

210 mA

LOW OPERATING TEMPERATURE

-40 C (-40 F)

HIGH OPERATING TEMPERATURE

85°C (185°F)

UPPER OPERATING HUMIDITY

90%

ENVIRONMENTAL MISC.

NA

FILTER PROCESSOR FAMILY

ARM / RISC

Description

The SOM-9X25 Embedded ARM System on Module (SoM) based on the Atmel AT91SAM9x25 processor. Designed and manufactured in the USA, this wide temperature, fanless ARM9 400 MHz SoM has an Ethernet PHY included along with 6 serial ports with auto RS-485. It utilizes up to 4GB of eMMC Flash, up to 16MB of serial data flash, and up to 128MB of DDR2 RAM. A SoM is a small embedded module that contains the core of a microprocessor system.

Using the same small 144 pin SODIMM form-factor utilized by other EMAC SoM modules, the SoM-9×25 is the ideal processor engine for your next design. All of the ARM processor core functionality is included on this tiny board including: Flash, Memory, Serial Ports, Ethernet, I2S Audio, PWMs, Timer/Counters, A/D, digital I/O lines, Clock/Calendar, and more.

The SoM-9×25 is designed to plug into a carrier board that contains all the connectors and any custom I/O required for the application. This approach allows the customer or EMAC to design a Custom Carrier Board, that meets the customer’s I/O, dimensional, and connector requirements without having to worry about the processor, memory, and standard I/O functionality. With this System on Module approach, a semi-custom hardware platform can be developed in as little as a month.

In addition to the option of the developing a custom carrier board, one can be purchased off-the-shelf from EMAC. EMAC provides off-the-shelf Carrier boards that feature A/D, D/A, MMC/SD card, keypad, LCD, Audio, and Modem interfaces. The recommended off-the-shelf Carrier Board for the SoM-9×25 is the SoM-150ES which allows the user to immediately start coding their application using the powerful Linux Operating System and Tools.

The System On Module approach provides the flexibility of a fully customized product at a greatly reduced cost.

___________________________________________________________________________

EMAC is a global leader in system on module and carrier board embedded systems.  The System on Module (SoM) is an ideal alternative to custom engineering. With the SoM approach you get the best of aspects of both buying an Off-The-Shelf Embedded Single Board Computer (SBC) and a Custom Engineered solution. With Off-The-Shelf embedded components such as a generic carrier board and SOM module, it is possible to start development on your software applications before the custom carrier board is complete; thus offering a reduced time to market for your system. A System on Module (SoM) is comprised of a small processor module with CPU bus accessibility and standard I/O functionality. The SoM module does not have any connectorization and is designed to be plugged into a Carrier Board.

Interested in custom engineering? Learn more. 

Search our video library.

Downloads

MANUALS
SOM-9X25M_User_Manual1.01.pdf
SOM-9X25M_User_Manual.pdf

DATA SHEETS
SoM-9x25_Datasheet.pdf

Peripheral Options

You may also like…

All search results