Single Board Computers
Microprocessor Training Systems
Custom Engineering & Manufacturing

EPROM Programmer Board:

The EPROM Programmer board connects directly to an EPAC, MicroPac, or Microprocessor Trainer System via a 50 pin ribbon cable  (included).  It is capable of programming 8 K by 8   (2764)  EPROMs through 64 K by 8   (27512)  EPROMs.  All the necessary software is included with the E-FORTH, MTBASIC and MOS Operating Systems, to verify erasure, burn EPROMs and Verify EPROM contents. An E-FORTH word/MTBASIC command is also included to automatically burn Auto-Start Target Application programs.  The dimensions are 5 1/4" by 3 5/8".  It is also available in kit form.

32 Line Parallel I/O Board:

The programmable 32 Line Parallel I/O Board adds four 8-bit I/O ports to an EPAC, MicroPac, or Microprocessor Training System.  One of the 8 bit ports is dedicated as as output port while the other three ports can be configured as input or output ports and one of these three ports can be split further as 4 input lines and 4 output lines.  The board is a plug-on accessory utilizing the 8255 Programmable Peripheral Interface I.C.  (PPI), with outside world terminations via two 50 pin, OPTO I/O rack compatible, male header connectors.  Connection to the system is through a 50 pin ribbon cable  (included).  The board's terminations are all direct  (unbuffered)  TTL logic levels.  The dimensions are 5 1/4" by 3 5/8".

EPROM Programmer Board
E020-08 ... EPROM Programmer Board ............................. 149.00
    (Fully assembled and tested w/ user manual)

32 Line Parallel I/O Board
E020-09 ... 32 Line Parallel I/O Board .........................  89.00

Product pricing, features, and specifications are subject to change without notice.

Copyright © 2008 EMAC, Inc.
All Rights Reserved