Remote Access Device

Single Board Computers
Microprocessor Training Systems
Custom Engineering & Manufacturing

Due to several factors including component availability, the Remote Access Device has been declared End of Life. The Last Time Buy date of the EMAC RAD is 11/31/2011.

Features

Options

Pricing

The RAD is a RADical new device that provides serial terminal access to a remote host via a keypad and an LCD. This low cost unit not only provides terminal access but also control functions through ASCII escape sequences sent from the host. The RAD comes optionally equipped with two relay outputs and an opto input providing the control functionality. Also available in a 5.25" drive bay version, known as the BayRAD.

A typical RAD application might involve automated building access. The host would prompt the user through the RAD's LCD for an Access Authorization Code. The user would enter the Authorization Code required to enter the building using the keypad. The RAD device would send this information back to the host unit. The host unit would then determine if the Authorization Code was correct. If the Code was incorrect the host could issue an audible warning through the RAD's on-board beeper and reprompt the user for the required Authorization Code. If the Code was correct the host could unlock the door using one of the RAD's on-board relays. Up to 128 RADs can connect to a single host, enough to cover a very large building.

The great thing about the RAD is you can use whatever host you're comfortable with, from PICs to PCs, as long as it has a serial port (RS232/422/485), you're set. No programming of the RAD is necessary, just simply send it ASCII data and it displays characters on the LCD. Enter data from the keypad and ASCII characters are returned to the host. ASCII escape sequences control the relays, LEDs, beeper and returns the opto inputs status. The RAD's small size and low cost make it the ideal solution for Remote Access applications.

FEATURES

Backlit LCD interface accepts Text LCDs up to 4 lines of 20 characters. Accepts a wide variety of LCDs. RAD supports cursor control, line wrap, & scrolling of display.
Matrix Keypad interface accepts up to a 4 x 5, 20 key keypad. RAD debounces key presses and can automatically beep when a key has been pressed.
Four status LEDs are provided.
Auto line wrap and scroll.
RS232/422/485 interface. RS422/485 interface allows serial line lengths of up to 4000 feet.
RS485 interface allows mult-drop network capability using 9 bit protocol, provides for up to 128 RADs to be connected to a single host.
Beeper can be turned on and off on demand.
Small size: 4.5" by 2.5", Directly connects to most LCDs.

OPTIONS

Additional Pass-through serial RS232 port. Handy for magnetic card readers etc.
I/O option provides two relays and one opto input. Relays contacts rated up to 130 Volts AC at 1 amp. Opto input can except up to 5, 24, or 130 Volts AC/DC.
Wide variety of non-backlit and backlit LCDs, & sealed tactile keypads.

PRICING (Single Unit. Includes: Integration, Setup,Testing, & Enhanced Support)

E060-01-00000 ... Remote Access Device (RAD)	Call
E060-01-00001 ... RAD w/ I/O Upgrade	Call
E060-01-00010 ... RAD w/ Additional Serial Port (Non-Stock. 25 piece minimum order)	Call
E060-01-00011 ... Additional Serial Port & I/O Upgrade (Non-Stock. 25 piece minimum order)	Call

POWER SUPPLIES

PER-PWR-00030 ... 9 V @ 500 mA (110 V @ 60 Hz US)	Call
PER-PWR-00031 ... 9 V @ 500 mA (220 V @ 50 Hz Europe)	Call

KEYPADS

E020-25 ... 12 KEY MEM TELEPHONE STYLE KEYPAD	Call
E020-21 ... 16 KEY MEMBRANE HEX STYLE KEYPAD	Call

DISPLAYS

E060-15 ... 20 CHAR. X 2 LINE LCD DISPLAY	Call
E060-16 ... 20 CHAR. X 2 LINE LCD BACKLIT DISPLAY	Call
E060-17 ... 20 X 2 VF Display	Call
E060-20 ... 20 x 4 Backlit LCD	Call

Product pricing, features, and specifications are subject to change without notice.