✆ Get in touch today: (618) 529-4525|info@emacinc.com

SoM-9G45M – System on Module

This product is NRND– Please consider the SoM-A5D36.

Designed and manufactured in the USA the SoM-9G45 is a System-on-Module (SOM) based on the Atmel ARM9 AT91SAM9G45 processor. This Fanless ARM9, 400 MHz SoM has an Ethernet PHY included along with 4 serial ports. It utilizes up to 256MB of external DDR2 / SDRAM, 1GB of NAND Flash and includes an MMU which allows it to run Linux Operating System. A SoM is a small embedded module that contains the core of a microprocessor system.

  • Embedded Atmel ARM9 Jazelle AT91SAM9G45 400MHz Processor
  • Up to 256 RAM
  • Up to 1GB of NAND Flash
  • Up to 8MB of Serial Data Flash
  • SD/MMC Flash Card Interface

Product Variations

Name SoM-9G45M-120
Price Call
ATTRIBUTES
CPU
Embedded Atmel ARM9 Jazelle AT91SAM9G45
CPU cores
Single core
Speed 400 MHz
Memory 128MB DDR2 RAM onboard
Disk SD/MMC 256 MB Flash Card Interface
Serial 5x Serial Ports
USB2.0 1x USB 2.0 High Speed Host, 1x USB 2.0 High Speed Host/Device (OTG)
LAN 1x 10/100 BaseT Ethernet with on-board PHY
Expansion
Local ARM AT91SAM9G45 / 9M10 Bus accessible through SODIMM provides 22 address lines, 16 data bus lines, and control lines
Video
LCD Video Interface with up 1280 x 860 resolution
Temperature -40° to 85°C

Additional information

FORM FACTOR

200-PIN

PROCESSOR CORES

Single

PROCESSOR TYPE

Embedded Atmel ARM9 Jazelle AT91SAM9G45

PROCESSOR CLOCK SPEED

400 MHz

RAM

Up to 128MB DDR2 RAM onboard

PRIMARY FLASH

Up to 1GB NAND Flash

SECONDARY FLASH

Up to 8MB Serial Data Flash

MEMORY MISC.

"Flash Disk: 4-bit Parallel or SPI serial SDHC/MMC interface, Up to 1GB of NAND Flash Option Available ( MOQ may apply) "

DISK INTERFACE

SD/MMC Flash Card Interface (1x on SOM, 1x External)

BIOS / BOOTLOADER

Uboot

AUDIO

1x I2S Synchronous Serial Controllers with analog interface support

VIDEO OUT

LCD Video Interface & Resistive Touch Screen Interface

ETHERNET

1x 10/100BASE-T Ethernet with on-board PHY

WIRELESS NETWORKING

No

SERIAL PORTS

5x Serial Ports (RS485 & some with handshaking)

USB

1x USB 2.0 High Speed Host, 1x USB 2.0 Device

CAN

None

I2C

2x I2C Ports

SPI

2x SPI Port

GPIO

32x GPIO (3.3V) Lines

SDIO

1x SDIO SD Port

TIMERS/ COUNTERS/ PWM

2x 16-bit timers/counters with capture, compare, and PWM

TOUCH

Resistive Touch

A D CHANNELS

4

A/D RESOLUTION

10-bit

BUS EXPANSION

Local ARM Bus

OPERATING SYSTEMS

EMAC OE Linux

SIZE

2.66" × 2.375" (67mm × 60mm)

VOLTAGE

3.3 V

POWER MISC.

APM Sleep Mode

TYPICAL CURRENT

300 mA

MAX BOOT CURRENT

300 mA

CONSTANT BUSY LOOP CURRENT

290 mA

IDLE CURRENT

270 mA

LOW OPERATING TEMPERATURE

-40 C (-40 F)

HIGH OPERATING TEMPERATURE

85°C (185°F)

UPPER OPERATING HUMIDITY

90%

ENVIRONMENTAL MISC.

NA

FILTER PROCESSOR FAMILY

ARM / RISC

Description

Designed and manufactured in the USA the SoM-9G45M is a System-on-Module (SOM) based on the Atmel ARM9 AT91SAM9G45 processor. This Fanless ARM9, 400 MHz SoM has an Ethernet PHY included along with 4 serial ports. It utilizes up to 256MB of external DDR2 / SDRAM, 1GB of NAND Flash and includes an MMU which allows it to run Linux Operating System. A SoM is a small embedded module that contains the core of a microprocessor system.

Using the same small 200 pin SODIMM form-factor utilized by other EMAC SoM modules, the SoM-9G45 is the ideal processor engine for your next design. All of the ARM processor core is included on this tiny board including: Flash, Memory, Serial Ports, Ethernet, I2S Audio, PWMs, Timer/Counters, A/D, digital I/O lines, video, Clock/Calendar, and more.

The SoM-9G45 is designed to plug into a carrier board that contains all the connectors and any custom I/O required for the application. This approach allows the customer or EMAC to design a Custom Carrier Board, that meets the customer’s I/O, dimensional, and connector requirements without having to worry about the processor, memory, and standard I/O functionality. With this System on Module approach, a semi-custom hardware platform can be developed in as little as a month.

In addition to the option of the developing a Carrier board, one can be purchased off-the-shelf from EMAC. EMAC provides off-the-shelf Carrier boards that feature A/D, D/A, MMC/SD card, keypad, LCD, Touchscreen, and Audio interfaces. The recommended off-the-shelf Carrier Board for the SoM-9G45 is the SoM-200ES which allows the user to immediately start coding their application using the powerful Linux Operating System and Tools.

The System on Module approach provides the flexibility of a fully customized product at a greatly reduced cost.

___________________________________________________________________________

EMAC is a global leader in system on module and carrier board embedded systems.  The System on Module (SoM) is an ideal alternative to custom engineering. With the SoM approach you get the best of aspects of both buying an Off-The-Shelf Embedded Single Board Computer (SBC) and a Custom Engineered solution. With Off-The-Shelf embedded components such as a generic carrier board and SOM module, it is possible to start development on your software applications before the custom carrier board is complete; thus offering a reduced time to market for your system. A System on Module (SoM) is comprised of a small processor module with CPU bus accessibility and standard I/O functionality. The SoM module does not have any connectorization and is designed to be plugged into a Carrier Board.

Interested in custom engineering? Learn more. 

Search our video library.

Downloads

MANUALS
SOM-9G45-9M10_User_Manual.pdf

DATA SHEETS
SoM-9G45 Datasheet.pdf

Peripheral Options

PRODUCT # DESCRIPTION PRICE
OPERATING SYSTEMS
SL05x-XON-xx EMAC OE Linux 5.x for x86 Free
SC600-000-0010D Windows CE 6.0 Pro License (Basic configured installation included with License, Flash and SBC purchase; SOLD ONLY WITH HARD DRIVE OR FLASH DRIVE MEDIA) Call

You may also like…

All search results