- AMD R-Series APU Bald Eagle
- UP To 16 GB DDR3
- Four Independent Displays
- Outstanding graphics performance
Board Information
- Pin Definition: PICMG COM.0 R2.1 Type 6 pin-out definition
- Form Factor: PICMG COM.0 R2.1 basic module 125 x 95 mm
System Information
- CPU: Second-generation AMD embedded R-series APU
- Chipset: AMD A77E FCH
- Memory: 2 SODIMM socket for DDR3L-1600, up to 16GB
- BIOS: AMI UEFI 64Mbit SPI BIOS
- Power management: Supports power saving modes including Normal/ Standby/Suspend modes. ACPI 2.0 compliant.
Display
- Graphics Core: AMD Radeon HD9000 GPU supports DX11.1, OpenCL 1.2, OpenGL 4.2, and H.264 and MPEG4 decoding.
- VGA: Up to 1920 x 2000 resolution
- LVDS: Supports single and dual-channel 18/24-bit LVDS, up to 1920 x 1200
- DDIs (HDMI/DVI/DP): Supports 3 ports HDMI, DVI, or DP multiplexed.
- Resolution:
- – HDMI 1.4. supports up to 4096 x 2160 @ 30Hz, or 1920 x 1200 @ 60Hz
- – DisplayPort 1.2. supports up to 4096 x 2160 @ 30Hz
- – DVI Single-Link 1920 x 1200 @ 60Hz
- Display Boot Up Order:
- – First: LVDS (always first priority by default)
- – Second: DDIs
- – Third: VGA
- Dual Displays: (in DOS/BIOS mode)
- – LVDS + any DDI
- – LVDS + VGA
- – Any DDI + VGA (after LVDS function is disabled)
- Triple Displays: (after booting to OS)
- – LVDS + any 1 DDI + VGA
- – LVDS + any 2 DDIs
- – Any 2 DDIs + VGA (after LVDS function is disabled)
- – Any 3 DDIs (after LVDS function is disabled)
- Quad Displays: (after booting to OS)
- – LVDS + any 2 DDIs + VGA
- – LVDS + any 3 DDIs
- – Any 3 DDIs + VGA (after LVDS function is disabled)
Expansion Interface
- PCI Express x16: Supports one PCIe x16 port (default) compliant to PCIe Gen3* (8.0 GT/s) specifications.Other combinations can be configured using the BIOS Setup utility.
- Note! PCIe x16 can be reconfigured to 1 DDI + PCIe x8 + PCIe x4 without hardware modifications.
- PCI Express x1: Supports seven PCIe x1 ports (default) compliant to PCIe Gen2* (5.0 GT/s) specifications. Other combinations can be configured using the BIOS Setup utility
- Audio Interface: HD audio interface
- LPC Bus
- SMBus
- I2C Bus: Up to 400KHz
- SPI: Supports SPI BIOS only
I/O
- Ethernet: Intel i211AT Gigabit LAN supports speeds of 10/100/1000 Mbps
- SATA: Four SATA Gen3 (600 Gb/s) ports
- USB Interface: Four USB3.0 and eight USB 2.0 ports
- Serial Port: Two 2-wire serial ports
- Express Card: Two ports
- Panel Control: Supports panel backlight on/off and brightness control
- Thermal Protection: Supports thermal shutdown and APU throttling
- Watchdog Timer: Multi-level, multi-option watchdog timer with 65536-level timer interval (0 ~ 65535 seconds)
- Smart Fan: One port on module, one port on carrier board
- GPIO: 8-bit GPIO
- Hardware Monitor: Vin, 5VSB, CMOS
- TPM: BOM option, default not available
The CPU is EOL for this product, please see this article for more information
SOM-5893 is a COM-Express basic pin-out Type 6 module that complies with the PICMG (PCI Industrial Computer Manufacturers Group) COM.0 R2.1 specification. The CPU module comprises a second-generation AMD embedded R-series APU, FCH A77E, and other peripheral chips to provide COM-specific functionalities. The latest AMD APU supports HeteoHSA.
SOM-5893 can support four independent symmetrical displays (LVDS, DDI, and VGA) of up to 4K2K DDI resolution, enabling users to set diverse combinations of simultaneous displays. With a next-generation AMD Radeon HD9000 graphics card, DX11.1 support, OpenCL 1.2, OpenGL 4.2, and a H.264 and MPEG4 decoder, this module offers enhanced media effects and outstanding 3D performance. Built-in high speed I/O ports include USB 3.0 and SATAIII for transmitting big data. The PEG x16 lane with up to Gen3 compliance (8 GT/s bit rate) and 7 PCIe x1 can be configured according to users’ applications via the BIOS Setup utility.
The high performance, embedded platform-level power consumption, and diverse extensions and I/O interfaces of SOM-5893 make it suitable for computing-intensive, thermally sensitive, graphics/media-intensive designs, and I/O-demanding applications.