- Small, 144 pin SODIMM form factor (2.66" x 1.5")
- V2 ColdFire core delivering 54 MIPS at 66 MHz & 66 MIPS at 80 MHz running from Cache/RAM
- 10/100BaseT Ethernet with on-board PHY
- 3 serial port with handshake
- 1 CAN 2.0B port
- 16 MB of SDRAM
- Up to 4.5 MB of Flash
- 64K of Nonvolatile Battery RAM
- Battery backed Real Time Clock
- SDHC/MMC Flash Card Interface through SPI
- SPI & I2C
- Timer/Counters and Pulse Width Modulation (PWMs) port
- Analog-to-Digital converter
- Typical power requirement less than 1 Watt
- JTAG & BDM for debug, including real-time trace
- FREE Eclipse IDE with GCC & GDB development tools
The SoM-5282M is based on the Freescale Coldfire MCF5282 processor. This 32-bit 68000 code compatible processor has an Ethernet MAC built-in along with 3 serial ports. It can directly access 4 GB of memory and can utilize uClinux Operating System. A SoM (System on Module) is a small embedded module that contains the core of a microprocessor system.
Using the same small SODIMM form-factor utilized by other EMAC SoM modules, the SoM-5282 is the ideal processor engine for your next design. All of the Coldfire processor core is included on this tiny board including: Flash, Memory, Serial Ports, Ethernet, CAN, PWMs, Timer/Counters, A/D, digital I/O lines, Clock/Calendar, and more.
The SoM-5282M is designed to plug into a carrier board that contains all the connectors and any custom I/O required for the application. This approach allows the customer or EMAC to design a Custom Carrier Board, that meets the customer's I/O, dimensional, and connector requirements without having to worry about the processor, memory, and standard I/O functionality. With this System on Module approach, a semi-custom hardware platform can be developed in as little as a month.
In addition to the option of the developing a Carrier board, one can be purchased off-the-shelf from EMAC. EMAC provides off-the-shelf Carrier boards that feature A/D, D/A, MMC/SD card, keypad, LCD, and Modem interfaces. The off-the-shelf Carrier Board (SoM-100ES) allows the user to immediately start coding their application using the powerful uClinux Operating System and Tools.
The System on Module approach provides the flexibility of a fully customized product at a greatly reduced cost.