|
|
Single Board Computers |
|
|
|
|
|
CONTACT: Eric Rossi For Immediate Release ARM Based Panel PC with 10" 1024x600 TFT LED Backlit LCD Carbondale, Illinois, March 9, 2012 - EMAC, Inc. announces the PPC-E10, with a 10" 1024x600 TFT LED Backlit Wide Screen LCD and a resistive touch screen. Unlike other compact Panel PCs, the PPC-E10 comes with either Windows CE 6.0 or Linux fully configured and installed on flash disk. This allows the software engineer to concentrate on writing applications and not have to worry about configuration and setup. Just apply power and watch the WinCE or X Windows User Interface appear on the vivid color LCD. Interact with the PPC-E10 using the responsive, integrated touchscreen. The PPC-E10 Panel PC has an embedded ARM9, 400 MHz Fanless Low Power Processor and includes an MMU which allows it to run WindowsCE and Linux Operating Systems.. This Panel PC supports up to 256MB of external DDR2 / SDRAM, 1GB of NAND Flash, and 4MB of serial data flash. In addition, 2 MMC/SD card sockets are provided for additional Flash storage. The PPC-E10 can be connected to a network using the 10/100 Base-T Ethernet controller and its onboard RJ-45 connector, and has 2D Accelerated Video with a Hardware Video Decoder. The PPC-E10 offers three RS-232 serial ports and one RS-422/485 port with Auto RS485. Also provided are; one high speed USB 2.0 host port, one high speed USB 2.0 On-The-Go (OTG) Host/Device port, SPI and I2C ports, an I2S Audio port with Line In/Out and a battery backed real time clock. The PPC-E10 can use power from +12 Vdc. to +26 Vdc. wide input voltage range. When developing CE 6.0 applications for the PPC-E10, Microsoft Visual Studio 2005/2008 can be utilized. For Linux application development, EMAC provides a Free Eclipse IDE. Both Visual Studio and Eclipse provide everything the user needs for developing PPC-E10 applications. All the compiling, converting, downloading, and debugging inherent to software development can be done from one easy to use high level interface. EMAC provides an SDK for the PPC-E10, which contains source examples and drivers. The PPC-E10 starts at $580.00 USD per unit. For more information on the PPC-E10 go to our website: http://www.emacinc.com/panel_pc/ppc_e10.htm ### About EMAC, Inc. (www.emacinc.com) Since 1984, EMAC, Inc. has provided customers worldwide with custom hardware, software and manufacturing. EMAC’s custom services include Digital and Analog Hardware Design, BIOS adaptation, Operating System integration (Windows CE, NT Embedded, XP Embedded, and Linux), driver development and software application development. In addition, EMAC offers a comprehensive line of products and services that include Single Board Computers (SBCs), SBC Peripherals, and Microprocessor Training Systems. Off-the-shelf SBCs include x86 compatible, 32-bit RISC and both 8-bit and 16-bit microcontrollers.
|
|
Copyright © 2012 EMAC,
Inc. |